B2B Cold Email Templates and Follow-Up Sequence for Consultants
Three annotated B2B cold email templates, a 4-step follow-up sequence, list building, anti-spam rules by country and a before/after rewrite for consultants.

Cold email is still one of the few ways to reach a buyer who has never heard of you, without paying a marketplace commission. Most templates online, though, are built for software sales teams sending thousands of messages. As a consultant or a small agency, you need the opposite: a short list, a reason to write to each person, and a follow-up plan you can run by hand.
This guide gives you the rules to check first, a method to build a list of 30 to 50 prospects, three annotated templates, a four-step follow-up sequence, a before/after rewrite of a weak email, and AI prompts to speed up drafting.
Step 1: Check the rules where your prospect is
Anti-spam and data protection rules depend on the recipient's country, not only yours. "It's B2B" is not a blanket exemption anywhere. The table summarizes what official regulators say for four common markets. If you prospect elsewhere (India, Australia, GermanyâŠ), check the local regulator before you send.
| Where the recipient is | Can you email a business contact without prior consent? | What every message needs |
|---|---|---|
| United States (CAN-SPAM) | Yes. The law is opt-out, but it makes no exception for business-to-business email. | Accurate sender and subject line, a clear disclosure that the message is an advertisement, your valid physical postal address, and a clear way to opt out. Opt-outs must be honored within 10 business days, and each violating email can cost up to $53,088 (FTC (US), CAN-SPAM Act compliance guide, page consulted 14 November 2026). |
| United Kingdom (PECR + UK GDPR) | Yes for "corporate subscribers" (companies, LLPs). No for sole traders and some partnerships, who are treated like individuals and need consent or the "soft opt-in". | Your real identity and a valid address to opt out. If the address names a person, UK GDPR applies: you need a lawful basis, must tell them how you got their data, and must stop if they object (ICO (UK), business-to-business marketing, page consulted 14 November 2026). |
| France (CNIL) | Yes, if the message relates to the person's job (for example, a finance tool pitched to a finance director). Generic addresses such as contact@ are not covered by these rules. | The person must be informed and able to object simply and for free. Each message must show who is sending it and offer an easy way to refuse further messages (CNIL (France), page consulted 14 November 2026). |
| Canada (CASL) | Only with consent. Implied consent can apply when the person published their address with no "no solicitation" statement and your message relates to their business role. | Identification and an unsubscribe mechanism; stop within 10 business days of a request. You must be able to prove consent, for example with a dated screenshot of the page where the address appeared (CRTC (Canada), CASL guidance on implied consent, page consulted 14 November 2026). |
Two practical consequences for a small firm: keep a "do not contact" list and check every new list against it, and write down where each address came from. This is general information, not legal advice.
Step 2: Build a small, targeted list
A short list of people you have researched lets you give each of them a real reason for writing, and it keeps spam complaints low. Build it in a spreadsheet with these columns: company, contact name, role, email, source of the address, date found, reason to write, status.
- Define one segment. One industry, one company size, one role. Example: operations directors at logistics firms with 50 to 250 staff.
- Find companies with a visible need. Look for hiring for roles you could cover, a new site, a funding round, a published tender or subcontracting need (you can browse open ones on Sendbiz), or a regulation that affects them.
- Check the company. Confirm it is active and note its legal form, which matters in the UK (company versus sole trader). The company registration check helps with this.
- Find the right person. Use the company website, press releases and public registers. Prefer the person who owns the problem over the CEO.
- Write one "reason to write" per row. If you can't fill that cell, drop the row.
- Cap your volume. Send 10 to 20 new emails per day by hand at first. Google advises increasing volume slowly and keeping the spam rate reported in Postmaster Tools below 0.10%, never reaching 0.30% (Google, 2024).
Step 3: Use one of three templates
Each template follows the same structure: a specific reason for writing, one sentence about a likely problem, one piece of proof, and a small request. Keep it under 120 words, in plain text, with no attachment.
Template 1: Problem-led
Subject: month-end close at [Company]
Hi [First name],
As finance teams grow, the month-end close often gets longer, usually because reconciliations are still done by hand.
I'm an independent finance consultant. On my last project for a [industry] firm of similar size, we cut the close to [6] days in [3] months by redesigning the reconciliation workflow.
Is the close length a topic for you this year? If so, I can send a one-page outline of the approach.
[Name], [Firm], [postal address]
Business offer. Reply "no" and I won't write again.
Why it works: the subject names their world, not your service. The problem is stated as a pattern, not an accusation. The proof uses your real numbers (replace the brackets with facts you can show). The ask is a yes/no question, not a 30-minute call.
Template 2: Trigger-event
Subject: your new [city] warehouse
Hi [First name],
I saw that [Company] is opening a site in [city] in [month]. An opening like this usually means hiring and training new staff in a few weeks while the existing team keeps running.
My agency handles onboarding programs for logistics firms: training plans, first-week schedules and manager checklists, delivered in [4] weeks.
Would it help if I shared the checklist we use for site openings?
[Name], [Firm], [postal address]
Not relevant? Reply "stop" and I'll remove you.
Why it works: the first line proves the email was written for them. The offer (a checklist) costs them nothing to accept and starts a conversation.
Template 3: Referral-style
Subject: [Mutual contact] suggested I write
Hi [First name],
[Mutual contact] and I worked together on [project] at [Company]. She mentioned you're reviewing [topic] and thought my experience with [specific thing] could be useful.
Would a 20-minute call next week make sense, or would you prefer a short written summary first?
[Name], [Firm], [postal address]
Reply "no thanks" and I won't follow up.
Why it works: a real shared contact is the strongest opening you have. Only use it with that person's permission.
Step 4: Run a four-step follow-up sequence
A first email often arrives at a bad time; a short follow-up gives the reader a second chance to answer. The timings below are a starting point, not a rule. Send each follow-up as a reply in the same thread, and stop the sequence as soon as the person answers or opts out.
| Step | When | What to send |
|---|---|---|
| 1. First email | Day 0 | One of the templates above. |
| 2. Short nudge | Day 3 or 4 | Two lines adding one new detail: "One thing I left out: the outline includes the reconciliation checklist we used. Happy to send it." |
| 3. Useful resource | Day 8 to 10 | Something they can use without replying: a short checklist, a relevant public statistic with its source, or a two-paragraph example. |
| 4. Close the loop | Day 15 to 20 | "I'll stop here so I don't clutter your inbox. If [topic] comes up later, my details are below." Then mark the row as closed. |
Log every reply in your spreadsheet: interested, not now (note a date to come back), wrong person (ask who to contact), or no (add to your do-not-contact list).
Step 5: Rewrite a weak email (before and after)
Here is a typical first draft, written as an example.
Subject: Partnership opportunity
Dear Sir or Madam, I hope this email finds you well. My name is Sam and I am the founder of an innovative digital agency with 10 years of experience. We offer web design, SEO, social media, branding and app development for companies of all sizes. Our passionate team delivers exceptional results. Please find attached our brochure. Do you have 30 minutes this week for a call to discuss how we can help your business grow?
What is wrong: a vague subject, no name, five services and no focus, adjectives instead of proof, an attachment, and a big ask.
Subject: checkout on [Company]'s mobile site
Hi [First name],
On your mobile site, the checkout asks for account creation before payment. That extra step is one of the first things we would test removing.
I run a small web agency. For [client, with permission], we rebuilt a similar checkout in [5] weeks; I can share the before/after screens.
Worth sending them over?
Sam, [Agency], [postal address]
Reply "no" and I won't email again.
The rewrite is half the length, names one observable problem, offers proof you can show, and asks for a yes or no.
Step 6: Use AI to draft, not to decide
An AI assistant can turn your research notes into a first draft or tighten an email you wrote. It can also invent facts, so treat every output as a draft you check line by line. Only paste what the task needs, and check your tool's data settings: in the UK and EU, a named contact's details are personal data.
Prompt 1: First draft from your list
Write a cold email under 120 words, in plain text, to [role] at [company type]. Reason for writing: [trigger or observation from your list]. Likely problem: [one sentence]. My proof: [a real result you can show]. End with one yes/no question, not a call request. No adjectives about my firm, no "I hope this finds you well". Give 3 subject lines under 6 words.
Prompt 2: Critique and shorten
Here is my cold email: [paste]. List what makes it about me rather than the reader, any claim I can't prove, and anything vague. Then rewrite it at half the length, keeping only facts I wrote. Mark every change.
Prompt 3: Follow-up
Here is my first email: [paste]. Write a two-line follow-up that adds one new useful detail: [detail]. Don't repeat the pitch or say "just checking in".
Before sending, check that every name, figure and result in the draft is true and that the identity and opt-out lines from Step 1 are still there.
What to measure
Track three numbers per batch of 50 emails: replies (any answer), positive replies (a call or a request for information), and opt-outs. Open rates are unreliable; Google says it doesn't track them and can't verify third-party figures. If positive replies stay near zero after two batches, change the segment or the reason to write before you change the wording.
When a prospect says yes, move quickly to a written offer. Our guides on writing a consulting proposal and calculating your day rate cover the next steps.
Common mistakes
- Assuming B2B means no rules. The US covers B2B email, UK sole traders need consent, and Canada requires consent or a documented exception.
- Buying a list. You can't show where addresses came from, the people did not expect your message, and Google explicitly advises against it.
- Writing about yourself first. Open with their situation; your credentials fit in one sentence.
- Fake "Re:" or "Fwd:" subject lines. They mislead the reader, and Gmail's sender guidelines ask senders not to start a subject line with "Re:" or "Fwd:" unless the message is an actual reply or forward (Gmail Help, Email sender guidelines, page consulted 14 November 2026).
- Leaving out identity and opt-out details. Add your firm name, postal address and a one-line way to refuse further emails.
- Sending too many emails too fast from a new domain, which raises the risk of being filtered.
- Following up forever. Four touches, then stop. Respect every "no" and keep it on your suppression list.
- Sending an AI draft unchecked. Assistants can add claims, names or results that are not yours.
- Using numbers you can't prove. Every result in your email should be one you could show the client.
How to Get B2B Clients on LinkedIn Without Paying for Ads
How to Get Your First B2B Clients as a New Consultant or Agency